En Vm

Actor 0x008A
ovl_En_Vm
Version	VRom		VRam		Size
Debug	`00EE3290`	`00EE4C20`	`{{{ram-start}}}`	`{{{ram-end}}}`	`1990`
NTSC 1.0	`00CC6B80`	`00CC8430`	`{{{ram-start}}}`	`{{{ram-end}}}`	`18B0`
PAL MQ	`00E7BE70`	`00E7D730`	`{{{ram-start}}}`	`{{{ram-end}}}`	`18C0`

Debug Rom Notes

Virtual Address: 80B2D460 - 80B2EDF0

Offset	Type	Description/Info
0x0000	Function	Gets called to store current function Beamos uses to its instance variables, and read by another function during runtime. Used to determine Beamos's next action. AC850214 -> stored relative 0x214 of Beamos's actor instance variables in RAM
0x061C	Function	Shoots lazer beam at Link
0x0660	Code	Loads unsigned byte from 0x2C4 of Beamos's actor instance in RAM to determine if lazer hits Link. Normally 0x11, checks for flag 0x02 where 0x13 ends firing phase
0x688 and 0x69C	Code	recalculated RAM address used as a limit maximum to a counter stored at 0x254 of the Beamos's RAM instance. Second half at 0x69C determines the counter limit to end lazer firing.
0x700	JAL	Jumps to 0x1A0 after finished firing lazer to reset to rotating action.

Offset	Type	Description/Info
0x214	ptr	RAM address reference to current function being used
0x220	int	Actual timer used to determine Beamos charging and firing lazer duration
0x248	float	size/scale of lazer beam when fired
0x254	short	used as a form of counter, compared against the second half of some RAM address value? Times out lazer when counter decrements. Also used as an increment to attack with. Possibly unique to the Beamos.
0x260	short	used to determine phase of lazer firing stages: 0x0004 to commence firing beam
0x2C4	byte	Used to determine phase of Beamos